||Last Updated: Aug 25th, 2013 - 13:05:16
Curtiss P-40B (Tomahawk IIA). 1/48th. Trumpeter
Trumpeters P-40B in 1/48 has copped a fair bit of criticism on various web sites. Mainly directed at the cockpit and rivet detail.
Mar 29, 2009, 15:41
Mustang MK. IVA. 48th scale, Tamiya
This natural metal Mustang Mk IVA (P-51K-10-NT, U.S. serial 44-12355) was the personal aircraft of Wing Commander (Flying) James Storrar and was fitted with an Aero Products prop, Dallas hood and exhaust shrouds. There exists much controversy when it comes to the colours applied to Storrar's aircraft and what I present is my best assessment based on the available references.
Oct 19, 2006, 09:16
Hasegawa 1/48 F4U-5N Corsair
Comments from Chris Crowx regarding the Hasegawa 1/48 F4U-5N Corsair.
Oct 1, 2006, 09:53
Which 72nd scale Spitfire kit?
Two Stage Merlins and Griffon engine kit summary.
Sep 11, 2006, 10:55
Fw 190A-3 and A-5 differences
The differences between the A-3 and A-5 are identified here. I have checked one of our stock of Hasegawa A-5s and can confirm the following...
Sep 3, 2006, 09:51
Blackburn Buccaneer. 1/48. Airfix
I had heard many bad things about the Airfix 1/48 Buccaneer, but it's the only option in this scale so I had no choice. The kit wasn't quite as bad as I'd been led to believe...
Aug 25, 2006, 17:16
Focke Wulf Fw 190A. 1/24 Airfix
In general outline, it isn't too bad, though the mid fuselage around the cockpit area is made over-wide, possibly to aaccomodate a removeable pilot...
Aug 13, 2006, 16:28
The 'Edmonton Special' P-51D Mustang. Hasegawa 1/32 scale
As good as the Hasegawa Mustang is, it does not hold a candle to the latest P-51D's released by Tamiya or Hasegawa in 1/48th scale. Keeping this in mind, I decided that if this model was to compete on equal ground with these newer releases it would need some help.
Jul 21, 2006, 11:58
Supermarine Spitfire Mk VB. 1/48 Tamiya
In my limited experience Tamiya Kits are excellent and easy for even a amateur like me to build a good model. My only minor criticism is the exhausts, so I added the excellent Ultracast exhaust set.
Jul 12, 2006, 16:22
F9F-5 Panther, Grumman. 1/32nd, Fisher. Part 1
Fisher Model and Pattern issued a 1/32 kit of the Grumman F9F-5 Panther as kit number 3201 in 2005. It is a very impressive kit in full resin with additional etched metal parts and nice decals including stencilling. The Panther kit costs about U$ 150,= and although at first site not cheap, you get a very impressive and nice model well worth the money. Certainly compared to good injection moulded 1/32 kits , the price is competitive
Jun 16, 2006, 13:03